Round Convex Traffic and Safety Mirrors - Outside (Outdoor) Use Weatherproof
OUTDOOR ALL WEATHER CONDITIONS
OUTDOOR USE - WEATHERPROOF -   - These round convex mirrors can be used anywhere outdoors or indoors. With a strong steel back the mirrors will stand up to rain, snow, Ice and wind. All the mirrors have the protective rim around the mirror. The options a person would consider are: 1)SIZE - Estimate how far from the mirror you will be when you are looking at it. Use the rule-of-thumb of 1" diameter for each foot you are from the mirror. For 26" and larger the "Grey Area" is around plus or minus 1/2 the diameter of the mirror times 1 foot. 2)Mounting - The single centered mounts are easiest to install on flat walls, wooden posts, trees, etc. All sizes from 9" through 18" have a single center mount. The "SA" mirrors, 26" and larger, have two(2) swivel mounts and are supported with two extension arms. TIP: Go to the bottom this page and click on the Illustrations showing mounting configurations for a better understanding of the double mount mirrors. All of the "RP" mirrors have a Heavy-Duty single centered mount strong enough to hold the mirror with one swivel mount. The centered swivels are also easiest to adjust when you put them up. On the other hand, the extension arms on the Double Mount mirrors are ideal for attaching to an over-hang, standing up from the top of a wall or extending out perpendicular to a wall. 3) Mirror Lens type - For most applications you will want the standard Acrylic, however you can choose from multiple material (See Below). 4) Backing - The most common is the Galvanized steel back. There is also a Stainless Steel back if your in an area of salt or just don't want it to rust. NOTE: Galvanized steel will, over several years, become a little rusty but it will be many years before its strength is compromised.
Galvanized Steel or Stainless Steel backs with the heavy duty single centered swivel mount. The picture to your right is the 12" mirror. 12 inch Convex Steel Back Mirror 12 inch Convex Steel Back Mirror 12 inch Convex Steel Back Mirror Note: The Mounting bracket and swivel plate are black backed enamel on the Stainless Steel versions seen lower on this page.
---- Galvanized Steel Back - Round Convex Acrylic MIRROR - HEAVY-DUTY SINGLE CENTERED MOUNT ----
Round Acrylic convex mirror lens - Galvanized Steel Back - Galvanized Steel Heavy-Duty, Single Centered, Ball an Socket Swivel Mount, securely fastened to the back with 1" Mushroom rivets. Black "Extruded Rubber" Rim. The centered mount has only one wall mounting bracket so the mirror is easily fastened at a single location on a wall, post, tree etc. (Made in USA)
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
RP-P080MR 9"
  • $23.00
  • $22.43
  • $20.70
  • $19.55
RP-P120MR 12"
  • $46.00
  • $44.85
  • $41.40
  • $39.10
SA-PLXO12GB 12"
  • $47.00
  • $45.83
  • $42.30
  • $39.95
RP-P180MR 18"
  • $60.00
  • $58.50
  • $54.00
  • $51.00
SA-PLXO18GB 18"
  • $63.00
  • $61.43
  • $56.70
  • $53.55
RP-P260MR 26"
  • $99.00
  • $96.53
  • $89.10
  • $84.15
RP-P300MR 30"
  • $122.00
  • $118.95
  • $109.80
  • $103.70
RP-P360MR 36"
  • $164.00
  • $159.90
  • $147.60
  • $139.40
Galvanized Steel Backs with the double mount hardware. Swivel Mount The Double Mount hardware shown is available on the "SA" 26", 30" and 36" sizes. More Double mount options are available lower on this page.
---- DOUBLE MOUNT HARDWARE WITH EXTENSION ARMS - GALVANIZED STEEL BACK ----
These mirrors have an Acrylic lens with a galvanized steel back plate. The rim is the black rubber "Trim-Loc" edging. There are two swivel mounts on the back with extension arms to hold the mirror in a variety of positions. Made for general outside use. Great for around building and parking garages, mounted from overhead. (Assembled in USA) PICTURE OF THE DOUBLE MOUNT HARDWARE
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-PLXO26GB 26"
  • $100.00
  • $97.50
  • $90.00
  • $85.00
SA-PLXO30GB 30
  • $129.00
  • $122.00
  • $116.00
  • $109.00
SA-PLXO36GB 36"
  • $167.00
  • $162.83
  • $150.30
  • $141.95
-- UNBREAKABLE POLYCARBONATE MIRROR - GALVANIZED STEEL BACK - Double Mounts --
These UNBREAKABLE POLYCARBONATE Mirrors have a Galvanized Steel Back with Double Mounts. Polycarbonate Mirrors and Acrylic Mirrors look very much the same. The difference is in the flexibility. Where Acrylic can bend around 30 degrees before breaking, Polycarbonate will actually fold and not break. The bottom line is that Acrylic is more difficult to break compared to glass, Polycarbonate is many times more difficult (to impossible) to break. The only draw-back is the price and because polycarbonate is a softer material, it can be scuffed or scratched. (Assembled in USA)
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-LXO26GB 26"
  • $183.00
  • $178.43
  • $164.70
  • $155.55
SA-LXO30GB 30
  • $202.00
  • $196.95
  • $181.80
  • $171.70
SA-LXO36GB 36"
  • $271.00
  • $264.23
  • $243.90
  • $230.35
---- STAINLESS STEEL BACK (12 and 18" Sizes) - ROUND ACRYLIC CONVEX MIRROR - SINGLE CENTERED SWIVEL MOUNT ----
The Stainless Steel back is more resistant to rusting. These mirrors are a good choice where there conditions may be salty or where the environment promotes rusting. The wall mount bracket is included for placing onto a flat wall, post or tree..etc. There are illustration at the bottom of the page. (Assembled in the USA)
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-PLXO12SSB 12"
  • $55.00
  • $53.63
  • $49.50
  • $46.75
SA-PLXO18SSB 18"
  • $93.00
  • $90.68
  • $83.70
  • $79.05
---- SCRATCH RESISTANT COATED ACRYLIC - STAINLESS STEEL BACK ----
The Scratch Resistant Coated acrylic mirror Lens is an Acrylic mirror coated with a product that hardens the outside surface of the mirror. The coating improves its resistance to scratching. For use in areas where there is dust or abrasive particles blowing in the wind. NOTE: Scratch resistant mirrors can still be scratched so the same care must be maintained when cleaning the lens. Always lightly brush away large particles before cleaning, then use a soft clean cotton cloth to clean the mirror. (Assembled in USA)
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-HPLXO12SSB 12"
  • $63.00
  • $61.43
  • $56.70
  • $53.55
SA-HPLXO18SSB 18"
  • $89.00
  • $86.78
  • $80.10
  • $75.65
Stainless Steel Backs with the double mount hardware. Note: The Mount may be black or vary in color depending on Make and model of mirror. Swivel Mount Double Mount hardware shown is Available on the "SA" 26", 30", 36" and 48" styles.
---- STAINLESS STEEL BACK - DOUBLE MOUNTS WITH EXTENSION ARMS - ROUND ACRYLIC CONVEX MIRROR ----
These mirrors have an Acrylic lens with a stainless steel backplate. The rim is the black rubber "Trim-Loc" edging. There are two swivel mounts on the back with extension arms to hold the mirror in a variety of positions. Stainless Steel does not rust so the back will not deteriorate. This type of back would be worth considering if you are in a continously salty environment such as found along the coast.(Assembled in USA) PICTURE OF THE DOUBLE MOUNT HARDWARE
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-PLXO26SSB 26"
  • $111.00
  • $108.23
  • $99.90
  • $94.35
SA-PLXO30SSB 30"
  • $142.00
  • $138.45
  • $127.80
  • $120.70
SA-PLXO36SSB 36"
  • $189.00
  • $184.28
  • $170.10
  • $160.65
SA-PLXO48SSB 48"
  • $408.00
  • $397.80
  • $367.20
  • $346.80
---- STAINLESS STEEL BACKED - SCRATCH RESISTANT ACRYLIC MIRRORS - DOUBLE MOUNTS ----
This the same as the above mirror only with the Stainless Steel back. - Outdoor Use - Stainless Steel Back Double Mounts (Assembled in USA)
Item Code Size Price Each
  • 1
  • 5
  • 10
  • 15
 Add to Cart
SA-HPLXO26SSB 26"
  • $135.00
  • $131.63
  • $121.50
  • $114.75
SA-HPLXO30SSB 30"
  • $179.00
  • $174.53
  • $161.10
  • $152.15
SA-HPLXO36SSB 36"
  • $235.00
  • $229.13
  • $211.50
  • $199.75
SA-HPLXO48SSB 48"
  • $375.00
  • $365.63
  • $337.50
  • $318.75
CUT SHEETS

SA Round Convex Mirrors

ASSEMBLY INSTRUCTIONS

WALL MOUNTING INSTRUCTIONS

GENERIC EXTENSION ARM MOUNTING INSTRUCTIONS

SA EXTENSION ARM MOUNTING INSTRUCTIONS

ILLUSTRATIONS

12 & 18" Mounting Illustrations

26" and larger Mounting Illustrations

checkout